UA-113395072-1
Main Image
TD42ZA
TRIMDEK/STRAMIT MONOCLAD 0.42BMT - ZINCALUME
TRIMDEK:
Minimum recommended roof pitch = 2° (1 in 30)
Maximum length = 28000mm, Minimum length = 600mm
1. Cutting charges apply to lengths under 600mm and may be subject to a longer lead-time.
2. Longer lengths than listed may be available on application and should be confirmed by the designer.
3. Tolerance on sheet lengths +0-15mm
FASTENERS:
Steel up to 0.75mm BMT – SD1245
Steel >0.75mm BMT to 3.00mm BMT – SD1245
Timber – Hardwood – Type 17 12x65
Notes: 5 fasteners per m2. (Estimate for non-cyclonic area)
STANDARD FLASHINGS: (maximum lengths = 8000mm, minimum lengths = 1000mm)
Ridge Capping ST Ridge
Apron Flashing (Code - STBF)
Barge Capping (Code - STC)
Valley Gutter 0.42mm
Valley Gutter 0.55mm
Maximum recommended spacing of supports for nominal conditions (mm)
ROOFS – 0.42:
End Spans = 1300, Internal Spans = 1900, Unstiffened Eaves O’hang = 150, Stiffened Eaves O’hang = 300
ROOFS – 0.48:
End Spans = 1850, Internal Spans = 2600, Unstiffened Eaves O’hang = 200, Stiffened Eaves O’hang = 350
WALLS – 0.42:
End spans = 3000, Internal spans = 3000
WALLS – 0.48:
End spans = 3000, Internal spans = 3000
Weight: 3.353 KG/LM
LM

Category: ROLLFORM, ROOFING & RAINWATER